Industrial High-Pressure Jetting
Industrial high-pressure jetting can clear pipework, clean tubes and vessels, prepare surfaces and remove damaged concrete. The work is planned around the item in front of the crew.
View serviceIndustrial high pressure jetting for pipework, plant and structures
High-Pressure Water Jetting Services
Process lines, tube bundles, vessels, coated surfaces and damaged concrete need different jetting arrangements. Define the material to remove, the receiving surface, access and the recovery route.
Service details
Ask about industrial water jetting
Describe the pipe, vessel, tube bundle or surface and the material to remove.
Heat Exchanger Tube Cleaning
An opened exchanger often shows that fouling is concentrated in one pass or group of tubes. The cleaning plan should follow that pattern and record which bores were reached.
View serviceShow us the cleaning problem in its setting
Tell us what has changed: a line may have lost flow, a tube bundle may be due for inspection or a surface may be holding up a repair. Add one close photograph and one wider view so the jetting team can see both the build-up and the route to the work.
Our services
Choose from line and tube cleaning, tank and vessel jetting, surface preparation, concrete removal and planned shutdown support.
- ✓Deposit, coating and substrate
- ✓Equipment dimensions and openings
- ✓Manual or remote tooling position
- ✓Wastewater capture and holding point
How it works
The first pass should answer a practical question
A trial can show whether the deposit lifts, whether the surface beneath is sound and whether the released material reaches the prepared collection point. The jetting team uses that result to set the wider clean.
Discuss your jetting job
PROBLEM / TRIAL / CHECK
Survey, clean and check the equipment
- Find the affected sectionUse the operating symptom, drawing or inspection to mark where the work begins and ends.
- Prove a workable positionThe jetting team checks that the head can reach the surface and return without losing useful control.
- Watch the first returnA short pass shows how the build-up releases and whether the collection point can handle it.
- Present the item for inspectionThe agreed person reviews the cleaned area and any section that remains restricted or out of reach.
Problems we can help with
Deposits and cleaning problems we can remove
Loss of flow, uneven tube performance, hardened residue and failed coating each point to a different part of the jetting service.
Who we work with
Water jetting for industrial sites and equipment
Process plants, power stations, utilities, ports, factories and civil sites all place different demands on access, permits, production and wastewater control.
Survey / set-up / jet / inspectFrom site facts to completed work
Industrial water jetting
Show us where the cleaning problem starts
A line that has lost flow, an opened tube bundle and a surface awaiting repair each need a different first conversation. Tell us what changed and show the work area.
Jetting sequence
From work-face assessment to checked result
Pressure, flow and tooling are set from the way the deposit responds and the condition of the surface beneath it. Water and released material are controlled before the wider area is cleaned.
Define the work face
Record the equipment or surface, deposit, substrate condition and the result needed next.
Plan access and recovery
Confirm isolation, stand-off distance, exclusion controls and where water and loosened material will go.
Set the jetting method
Choose pressure, flow and tooling from the material response rather than a headline pressure figure.
Check the result
Inspect the cleaned area and record remaining deposit, substrate damage or inaccessible sections.
Water jetting knowledge
Jetting methods, site controls and applications
Read about pressure and flow, manual and remote methods, water containment and preparing equipment for cleaning.
Choosing Jetting Pressure and Flow
The right starting pressure and flow are confirmed on the actual deposit and surface. A trial patch shows whether the material lifts, where it travels and what is left beneath.
Read guidancePlanning a Water Jetting Shutdown
A jetting crew cannot use the whole production stop. Cooling, isolation and opening take time before cleaning, while inspection and closure need protected time afterwards.
Read guidanceRemote Jetting or Manual Jetting
Remote and manual jetting can both be useful on one item. The choice changes where the route, visibility or shape of the work face changes.
Read guidanceContainment and Wastewater Planning
Jetting water carries whatever the nozzle removes. Capture, screening and temporary storage are sized for the added water and the material expected from the work face.
Read guidanceQuestions about the work
High-pressure water jetting FAQs
Straight answers to common questions about quotations, equipment and wastewater.
What pressure will be used?+
The jetting team selects pressure, flow and nozzle after reviewing the deposit, substrate and access. A trial may be used where the surface response is uncertain.
Can a quotation be based on photographs?+
Close and wide photographs can support the first review. Drawings, dimensions or a site visit may be needed when the route or condition is hidden.
When does remote jetting make sense?+
Remote tooling must reach the complete work face, remain visible and return through the same route. The jetting team may test that movement before cleaning.
What happens to the jetting water?+
The quotation identifies how wash water is captured and held. Existing drains are used only when their destination and suitability are known.